公司基本信息

详细说明

6AG1505-0KA00-7AB0

SIP S7-1500 PS 1505 25W 24VD -25 ... +70 DEGEEES C WITH CONFORMAL COATING BASED ON 6ES7505-0KA00-0AB0 . SYSTEM POWER SUPPLY SUPPLIES THE OPERATING

，享受西门子

(SIEMENS)上海赞国自动化科技有限公司（西门子分销商）

上海赞国自动化科技有限公司
联系人： 颜工
电话（Tel）：-021-31660601
传真（Fax）：-021-67633621
联系QQ ：983991865

24小时销售技术服务热线：15000708648

地址（Add）：上海市松江区思贤路1855弄91号

我公司只销售西门子原装 免费一年保修

Overview

SIMATIC S7-1500 的系统电源
用于将交流或直流电源电压转换为内部电路所需的工作电压
25 W 或 60 W 输出功率
可用于 S7-1500 或 ET 200MP
通过 STEP 7 V12 进行组态

注：

SIP extreme 产品基于 SIMATIC 标准产品。此处的内容摘自相关的标准产品。增加了与 SIP extreme 相关的信息

Area of application

电源 (PS) 通过背板总线为 S7-1500 模块的内部电路供电。例如，如果由 CPU 或接口模块向背板总线提供的电源不足以为所有连接的模块供电，或者应在 S7-1500 配置中或在 ET 200MP 的分布式配置中实现一个以上电源段，就要使用这些电源。

Design

电源是用螺丝直接固定到 S7-1500 安装导轨上的，并通过 U 型连接器与上游或下游模块相连。

电源的前面包括：

状态和故障诊断显示 LED
故障 (Error)、运行 (RUN)、维护 (MAINT)

电源还包括：

接通/ 关断开关
电源端子

Functions

特性：

取决于模块类型的额定输入电压
取决于模块类型的输出功率
电源缓冲
与总线实现电流隔离

电源模块支持以下功能：

固件更新
识别和维护数据 I&M0 至 I&M3
在运行模式下组态
诊断消息
诊断中断

Technical Specifications

Order number	6AG1505-0KA00-7AB0	6AG1505-0RA00-7AB0	6AG1507-0RA00-7AB0
	SIP S7-1500 PS 25W 24V DC	SIP S7-1500 PS 60W 24/48/60V DC	SIP S7-1500 PS 60W 120/230V AC/DC
General information
Product type designation	PS 25W 24VDC	PS 60W 24/48/60V DC	PS 60W 120/230V AC/DC
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V12 / V12		V12 / V12
● STEP 7 configurable/integrated as of version	V5.5 SP3 or higher		V5.5 / -
● PROFI as of GSD version/GSD revision			- / -
Redundancy
● Redundancy capability	Yes	Yes	Yes
— for uprating	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V; SELV	24 V / 48 V / 60 V	120 V; 230 V
permissible range, lower limit (DC)	Static 19.2 V, dynamic 18.5 V	Static 19.2 V, dynamic 18.5 V	88 V
permissible range, upper limit (DC)	Static 28.8 V, dynamic 30.2 V	Static 72 V, dynamic 75.5 V	300 V
Rated value (AC)			120 V; 230 V
permissible range, lower limit (AC)			85 V
permissible range, upper limit (AC)			264 V
Reverse polarity protection	Yes	Yes
Short-circuit protection	Yes	Yes	Yes
Line frequency
● Rated value 50 Hz			Yes
Mains buffering
● Mains/voltage failure stored energy time	20 ms	20 ms	20 ms
Input current
Rated value at 48 V DC		1.5 A
Rated value at 60 V DC		1.2 A
Rated value at 120 V DC			0.6 A
Rated value at 230 V DC			0.3 A
Rated value at 120 V AC			0.6 A
Rated value at 230 V AC			0.34 A
Output current
Short-circuit protection	Yes
Power
Infeed power to the backplane	25 W; > +60 °C max. power input 12.5 W	60 W; > +60 °C max. power input 30 W	60 W; > +60 °C max. power input 30 W
Power loss
Power loss at nominal rating conditions	6.2 W	12 W	12 W
Interrupts/diagnostics/sta information
Sta indicator	Yes	Yes	Yes
Potential separation
primary/secondary	Yes; Electrical isolation for max. 60 V AC/75 V DC (base isolation)	Yes; Electrical isolation for 230 V AC (reinforced isolation)	Yes
Isolation
Isolation tested with	707 V DC (type test)	2 500 V DC/2 s (routine test)	2 500 V DC/2 s (routine test)
EMC
Interference immunity against voltage surge
● on the supply lines . to IEC 61000-4-5	Yes; +/- 1 kV (. to IEC 61000-4-5; 1995; surge symm.), +/- 2 kV (. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required	Yes; +/- 1 kV (. to IEC 61000-4-5; 1995; surge symm.), +/- 2 kV (. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required	Yes; +/- 1 kV (. to IEC 61000-4-5; 1995; surge symm.), +/- 2 kV (. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required
Degree and class of protection
Degree of protection . to EN 60529	IP20	IP20	IP20
Protection class	3; with protective conductor	1; with protective conductor	1; with protective conductor
Ambient conditions
Ambient temperature during operation
● min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
● max.	70 °C; = Tmax; for vertical mounting position Tmax = +40 °C	70 °C; = Tmax; > +60 °C max. power input 30 W; for vertical mounting position Tmax = +40 °C	70 °C; = Tmax; for vertical mounting position Tmax = +40 °C
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in ordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (nomissioning under condensation conditions)	100 %; RH incl. condensation/frost (nomissioning under condensation conditions)	100 %; RH incl. condensation/frost (nomissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fun and dry rot spores (with the exception of fauna). The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3B2 mold, fun and dry rot spores (with the exception of fauna). The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3B2 mold, fun and dry rot spores (with the exception of fauna). The supplied connector covers t remain on the ued interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray ording to EN 60068-2-52 (degree of severity 3). The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray ording to EN 60068-2-52 (degree of severity 3). The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray ording to EN 60068-2-52 (degree of severity 3). The supplied connector covers t remain on the ued interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, t. The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3S4 incl. sand, t. The supplied connector covers t remain on the ued interfaces during operation!	Yes; Class 3S4 incl. sand, t. The supplied connector covers t remain on the ued interfaces during operation!
Dimensions
Width	35 mm	70 mm	70 mm
Height	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm
Weights
Weight, approx.	350 g	600 g	600 g