西门子ET200模块6ES7131-4BD01-0AA0
| | 6ES7131-4BB01-0AA0 SIMATIC DP,5 Elektronikmodule 用于 ET 200S,2 DI 标准 DC 24V,15mm Baubr. 5 零件 je 包装机 数量单元： 5 |
(SIEMENS)上海赞国自动化科技有限公司（西门子分销商）
上海赞国自动化科技有限公司
联系人： 颜工[销售工程师]
电话（Tel）：-021-61990509
传真（Fax）：-021-67633621
联系QQ ：983991865
24小时销售技术服务热线 ：15000708648
微信；15000708648
地址（Add）：上海市松江区思贤路1855弄91号
本公司只销售西门子原装 ，享受西门子免费一年保修
Article number 6ES7131-4BB01-0AA0 6ES7131-4BB01-0AB0 6ES7131-4BD01-0AA0 6ES7131-4BD01-0AB0 6ES7131-4BD51-0AA0 6ES7131-4BF00-0AA0 ET200S, EL-MOD., 2DI ST, DC 24V, 5PCS. ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS. ET200S, EL-MOD., 4DI ST., DC 24V, 5PCS. ET200S, EL-MOD., 4DI HF, DC 24V, 5PC. ET200S, EL-MOD., 4DI HF, DC 24V, 5PCS. ET200S, ELEKTRONIKMODULE, 8DI DC 24V Supply voltage Rated value (DC) ● 24 V DC Yes; From power module Yes; From power module Yes; From power module Yes; From power module Yes; From power module Yes permissible range, lower limit (DC) 20.4 V 20.4 V 20.4 V 20.4 V 20.4 V 20.4 V permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 V 28.8 V 28.8 V 28.8 V Reverse polarity protection Yes Yes Yes Yes Yes Yes Input current from supply voltage L+, max. Dependent on encoder Dependent on encoder Dependent on encoder Dependent on encoder Dependent on encoder Dependent on encoder from backplane 3.3 V DC, max. 10 mA 10 mA 10 mA 10 mA 10 mA Encoder supply Number of outputs 0; no encoder supply Type of output voltage min. L+ (-0.5 V), under load min. L+ (-0.5 V), under load min. L+ (-0.5 V), under load min. L+ (-0.5 V), under load max. M +0.5 V, under load Short-circuit protection Yes; Electronic Yes; Electronic Output current ● Rated value 500 mA 500 mA 500 mA 500 mA 500 mA ● permissible range, lower limit 0 mA 0 mA 0 mA 0 mA 0 mA ● permissible range, upper limit 500 mA 500 mA 500 mA 500 mA 500 mA Power loss Power loss, typ. 0.4 W 0.4 W 0.7 W 0.7 W 0.7 W 1.2 W Address space per module ● with packing 2 bit 2 bit 4 bit 4 bit 4 bit ● without packing 1 byte 1 byte 1 byte 1 byte 1 byte 1 byte Digital inputs Number of digital inputs 2 2 4 4 4 8 Input characteristic curve in ordance with IEC 61131, type 1 Yes Yes Yes Yes Yes Yes; 2-wire sensors connectable Number of simultanely controllable inputs ● Number of simultanely controllable inputs 8 Input voltage ● Type of input voltage DC DC DC DC DC DC ● Rated value (DC) 24 V 24 V 24 V 24 V 24 V 24 V ● for signal "0" -30 to +5V -30 to +5V -30 to +5V -30 to +5V -5 to +30V -30 to +5V ● for signal "1" +15 to +30V +11 to +30V +15 to +30V +11 to +30V -15 to -30 V +15 to +30V Input current ● for signal "1", typ. 7 mA; at 24 V 8 mA 7 mA; at 24 V 8 mA 7 mA; at 24 V 5 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable No Yes; 0.1 / 0.5 / 3 / 15 ms No Yes; 0.1 / 0.5 / 3 / 15 ms No No — at "0" to "1", min. 2 ms; typically 3 ms 0.05 / 0.4 / 2.7 / 14.85 2 ms; typically 3 ms 0.05 / 0.4 / 2.7 / 14.85 2 ms; typically 3 ms 2 ms — at "0" to "1", max. 4.5 ms 0,15 / 0,6 / 3,3 / 15,15 4.5 ms 0,15 / 0,6 / 3,3 / 15,15 4.5 ms 4.5 ms — at "1" to "0", min. 2 ms; typically 3 ms 0.05 / 0.4 / 2.7 / 14.85 2 ms; typically 3 ms 0.05 / 0.4 / 2.7 / 14.85 2 ms; typically 3 ms 2 ms — at "1" to "0", max. 4.5 ms 0,15 / 0,6 / 3,3 / 15,15 4.5 ms 0,15 / 0,6 / 3,3 / 15,15 4.5 ms 4.5 ms Cable length ● shielded, max. 1 000 m 1 000 m 1 000 m 1 000 m 1 000 m 1 000 m ● unshielded, max. 600 m 600 m 600 m 600 m 600 m 600 m Encoder Connectable encoders ● 2-wire sensor Yes Yes Yes Yes Yes Yes — permissible quiescent current (2-wire sensor), max. 1.5 mA 1.5 mA 1.5 mA 1.5 mA 1.5 mA 1.5 mA Isochron mode Isochron operation (application synchronized up to terminal) Yes;E = 3000 Interrupts/diagnostics/sta information Diagnostic functions No Yes No Yes No No Alarms ● Hardware interrupt Yes; Parameterizable Diagnostic messages ● Short-circuit Yes; Short-circuit of outputs to ground; module by module Yes; Short-circuit of outputs to ground; module by module Diagnostics indication LED ● Group error SF (red) No Yes No Yes No ● Sta indicator digital input (green) Yes; per channel Yes; per channel Yes; per channel Yes; per channel Yes; per channel Yes Parameter Remark 1 byte 3 byte 1 byte 3 byte 1 byte 3-byte parameter (not essible for theer) Diagnostics short-circuit Disable / enable Disable / enable Potential separation Potential separation digital inputs ● been the channels No No No No No No ● been the channels and backplane Yes Yes Yes Yes Yes Yes Permissible potential difference been different circuits 75 V DC/60 V AC 75 V DC/60 V AC 75 V DC/60 V AC 75 V DC/60 V AC 75 V DC/60 V AC 75 V DC/60 V AC Isolation Isolation tested with 500 V DC 500 V DC 500 V DC 500 V DC 500 V DC 500 V DC Dimensions Width 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm Height 81 mm 81 mm 81 mm 81 mm 81 mm 81 mm Depth 52 mm 52 mm 52 mm 52 mm 52 mm 52 mm Weights Weight, approx. 35 g 35 g 35 g 35 g 35 g 35 g Article number 6ES7131-4CD02-0AB0 6ES7131-4EB00-0AB0 6ES7131-4FB00-0AB0 6ES7131-4RD02-0AB0 6ES7131-4BF50-0AA0 ET200S, EL-MOD., 4DI, UC 24-48V, 5 PCS ET200S, EL-MOD., 2DI, AC 120V, 5PCS. ET200S, EL-MOD., 2DI, AC 230V, 5PCS. ET200S, EL-MOD., 4DI DC 24V NAMUR ET 200S, 8 DI Source Input DC24V Supply voltage Rated value (DC) ● 24 V DC Yes; From power module Yes Yes; From power module permissible range, lower limit (DC) 24 V 20.4 V 20.4 V permissible range, upper limit (DC) 48 V 28.8 V 28.8 V Rated value (AC) ● 24 V AC Yes ● 120 V AC Yes; From power module ● 230 V AC Yes permissible range, lower limit (AC) 24 V 102 V 192 V permissible range, upper limit (AC) 48 V 144 V 264 V Reverse polarity protection Yes; AC or DC automatic Yes Input current from supply voltage L+, max. Dependent on encoder Dependent on encoder from supply voltage L1, max. Dependent on encoder Dependent on encoder from backplane 3.3 V DC, max. 10 mA 6 mA 6 mA Encoder supply Number of outputs 1 Type of output voltage min. L+ (-0.5 V), under load min. 8.2 V, loaded Short-circuit protection Yes; per module Yes; Electronic Output current ● Rated value 500 mA 45 mA ● permissible range, lower limit 0 mA ● permissible range, upper limit 500 mA Power loss Power loss, typ. 0.7 W 0.5 W 0.7 W 1.6 W 1.2 W Address space per module ● with packing 4 bit 2 bit 2 bit 4 bit ● without packing 1 byte 1 byte 1 byte 1 byte Digital inputs Number of digital inputs 4 2 2 4 8 Number of NAMUR inputs 4 Parallel switching of inputs No Input characteristic curve in ordance with IEC 61131, type 1 Yes Yes Yes Yes Number of simultanely controllable inputs ● Number of simultanely controllable inputs 4 Input voltage ● Type of input voltage AC/DC AC AC DC DC ● Rated value (DC) 24 V ● Rated value (AC) 120 V; 47 ... 63 Hz 230 V; 47 ... 63 Hz ● Rated value (UC) 24 V ● for signal "0" -6 to +6 V DC/ 0 to 5 V AC 0V AC to 20V AC 0V AC to 40V AC -5 to +30V ● for signal "1" -15 V DC to -57.6 V DC; 15 V DC to 57.6 V DC; 15 V AC to 48 V AC 79 to 132 V AC 164V AC to 264V AC -15 to -30 V Input current ● for signal "1", typ. 10 mA; 4 to 10 mA 3 mA; 3 to 9 mA 5 mA; 5 to 15mA 6 mA; at 24 V for 10 k switched contact — for signal "0" 0.35 to 1.2 mA — for signal "1" 2.1 to 7 mA for unswitched contact — for signal "0", max. (permissible quiescent current) 0.5 mA — for signal "1" typ. 8 mA for NAMUR encoders — for signal "0" 0.35 to 1.2 mA — for signal "1" 2.1 to 7 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable No — at "0" to "1", min. 15 ms 15 ms 2 ms — at "0" to "1", max. 15 ms 4.6 µs 4.5 ms — at "1" to "0", min. 25 ms 45 ms 2 ms — at "1" to "0", max. 15 ms 4.6 µs 4.5 ms Encoder connection ● Fixed current limitation for wire-break monitoring, min. 18 kΩ; Rated voltage 24 V (15 V to 35 V); rated voltage 48 V (30 V to 60 V): 39 kohms Cable length ● shielded, max. 1 000 m 1 000 m 1 000 m 200 m 1 000 m ● unshielded, max. 600 m 600 m 600 m 600 m Encoder Connectable encoders ● 2-wire sensor Yes No No Yes — permissible quiescent current (2-wire sensor), max. 2 mA; (0.5 to 2 mA), a minimum load current is necessary for wire break diagnostics. 1 mA 2 mA 1.5 mA Isochron mode Isochron operation (application synchronized up to terminal) Yes No No Yes Interrupts/diagnostics/sta information Diagnostic functions Yes; Parameterizable No No Yes; Diagnostic alarm No Alarms ● Diagnostic alarm Yes; can be set ● Hardware interrupt No Diagnostic messages ● Diagnostic information readable Yes ● Wire-break Yes Yes ● Short-circuit No No Diagnostics indication LED ● Group error SF (red) Yes Yes No ● Sta indicator digital input (green) Yes; per channel Yes; per channel Yes; per channel Yes; per channel Yes; per channel Parameter Remark 3 byte 3 byte 12 byte 3 byte Potential separation Potential separation digital inputs ● been the channels No No No No No ● been the channels and backplane Yes Yes Yes Yes Yes ● Been the channels and load voltage L+ Yes Permissible potential difference been different circuits 75 V DC/60 V AC 75 V DC/60 V AC 75 V DC/60 V AC been M internally and the inputs 1500 V AC 1500 V AC Isolation Isolation tested with 2500 V DC 2500 V DC 4 000 V DC 500 V DC 500 V DC Dimensions Width 15 mm 15 mm 15 mm 15 mm 15 mm Height 81 mm 81 mm 81 mm 81 mm 81 mm Depth 52 mm 52 mm 52 mm 52 mm 52 mm Weights Weight, approx. 35 g 31 g 31 g 35 g 35 g Article number 6ES7132-4BB01-0AB0 6ES7132-4BB01-0AA0 6ES7132-4BB31-0AB0 6ES7132-4BB31-0AA0 6ES7132-4BD00-0AB0 6ES7132-4BD02-0AA0 ET200S, EL-MOD., 2DO HF,DC24V, 0. , 5PC ET200S, EL-MOD., 2DO ST,DC24V, 0. , 5PC ET200S, EL-MOD., 2DO HF, DC 24V, 2A, 5PC ET200S, EL-MOD., 2DO ST, DC 24V, 2A, 5PC ET200S, EL-MOD., 4DO HF,DC24V, 0. ,5PCS ET200S, EL-MOD., 4DO ST,DC24V, 0. ,5PCS Supply voltage Reverse voltage protection Yes; whening the same load voltage as on the power module Yes; whening the same load voltage as on the power module Yes; whening the same load voltage as on the power module Yes; whening the same load voltage as on the power module Yes; whening the same load voltage as on the power module Yes; whening the same load voltage as on the power module Load voltage L+ ● Rated value (DC) 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module ● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Input current from load voltage L+ (without load), max. 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 10 mA; Per channel from backplane 3.3 V DC, max. 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA Power loss Power loss, typ. 0.4 W 0.4 W 1.4 W 1.4 W 0.8 W 0.8 W Address area Address space per module ● with packing 2 bit 2 bit 2 bit 2 bit 4 bit 4 bit ● without packing 1 byte 1 byte 1 byte 1 byte 1 byte 1 byte Digital outputs Number of digital outputs 2 2 2 2 4 4 Short-circuit protection Yes Yes Yes Yes Yes Yes ● Response threshold, typ. 1.5 A 0.7 to 1.8 A 4 A 2.8 to 7.2 A 0.7 to 1.5 A 1 to 1.5 A Limitation of inductive shutdown voltage to -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, L+( ) L+ (-55 to -60 V) Controlling a digital input Yes Yes Yes Yes Yes Yes Switching capacity of the outputs ● on lamp load, max. 2.5 W 本公司其他求购 浙江绍兴市 浙江绍兴市 电话：0769-22305675 传真：0769-23031246 联系QQ：234145668 周一至周日8:30-18:00
技术规范
150-1482-2798
粤公网安备 44190002001993号