您所在的位置:塑胶五金网 > 技术频道 > 机械外语

行业标准规范英汉对照-通用零部件(一)

来源:塑胶五金网发布时间:2007-12-16 15:16:22点击率:
    
1 GB/T 2-1985 紧固件 外螺纹零件的末端
 Fasteners--Ends of parts with external thread
2 GB/T 8-1988 方头螺栓 C级
Square head bolts--Product grade C
3 GB/T 10-1988 沉头方颈螺栓
Flat countersunk square neck bolts
4 GB/T 11-1988 沉头带榫螺栓
Flat countersunk nib bolts
5 GB/T 12-1988 半圆头方颈螺栓
Cup head square neck bolts
6 GB/T 13-1988 半圆头带榫螺栓
Cup head nib bolts
7 GB/T 15-1988 大半圆头带榫螺栓
Cup head nib bolts with large head
8 GB/T 22-1976 小六角头导颈螺栓
Bolts, small hexagon head with fit neck
9 GB/T 23-1976 小六角头螺杆带孔螺栓
Bolts, small hexagon head with hole through the shank
10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓
Bolts, small hexagon head with fit neck and hole through the shank
11 GB/T 25-1976 小六角头头部带孔螺栓
Bolts, small hexagon head with holes through the head
12 GB/T 26-1976 小六角头头部带孔导颈螺栓
Bolts, small hexagon head with fit neck and holes through the head
13 GB/T 27-1988 六角头铰制孔用螺栓 A和B级
Hexagon fit bolts--Product grade A and B
14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓 A和B级
Hexagon fit bolts with Split pin hole on shank--Product grade A and B
15 GB/T 29.1-1988 六角头头部带槽螺栓 A和B级
Hexagon bolts with slot on head--Product grade A and B
16 GB/T 29.2-1988 十字槽凹穴六角头螺栓
Cross recessed hexagon bolts with indentation
17 GB/T 31.1-1988 六角头螺杆带孔螺栓 A和B级
Hexagon bolts with split pin hole on shank--Product grade A and B
18 GB/T 31.2-1988 六角头螺杆带孔螺栓 细杆 B级
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
19 GB/T 31.3-1988 六角头螺杆带孔螺栓 细牙 A和B级
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
20 GB/T 32.1-1988 六角头头部带孔螺栓 A和B级
Hexagon bolts with wire holes on head--Product grade A and B
21 GB/T 32.2-1988 六角头头部带孔螺栓 细杆 B级
Hexagon bolts with wire holes on head--Reduced shank--Product grade B
22 GB/T 32.3-1988 六角头头部带孔螺栓 细牙 A和B级
Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
23 GB/T 35-1988 小方头螺栓 B级
Square head bolts with small head--Product grade B
24 GB/T 37-1988 T型槽用螺栓
Bolts for T-Slot
25 GB/T 38-1976 螺栓 技术条件
Bolts--Technical requirements
26 GB/T 39-1988 方螺母 C级
Square nuts--Product grade C
27 GB/T 41-1986 1 型六角螺母 C 级
Hexagon nuts--Style 1--Product grad C
28 GB/T 56-1988 六角厚螺母
Hexagon thick nuts
29 GB/T 61-1976 螺母 技术条件
Nuts--Technical requirements
30 GB/T 62-1988 蝶形螺母
Wing nuts
31 GB/T 63-1988 环形螺母
Lifting nuts
32 GB/T 65-1985 开槽圆柱头螺钉
Slotted cheese head screws
33 GB/T 67-1985 开槽盘头螺钉
Slotted pan head screws
34 GB/T 68-1985 开槽沉头螺钉
Slotted countersunk head screws
35 GB/T 69-1985 开槽半沉头螺钉
Slotted raised countersunk head screws
36 GB/T 70-1985 内六角圆柱头螺钉
Hexagon socket cap head screws
37 GB/T 71-1985 开槽锥端紧定螺钉
Slotted set screws with cone point
38 GB/T 72-1988 开槽锥端定位螺钉
Slotted set screws with cone point
39 GB/T 73-1985 开槽平端紧定螺钉
Slotted set screws with flat point
40 GB/T 74-1985 开槽凹端紧定螺钉
Slotted set screws with cup point
41 GB/T 75-1985 开槽长圆柱端紧定螺钉
Slotted set screws withlong dog point
42 GB/T 77-1985 内六角平端紧定螺钉
Hexagon socket set screws with flat point
43 GB/T 78-1985 内六角锥端紧定螺钉
Hexagon socket set screws with cone point
44 GB/T 79-1985 内六角圆柱端紧定螺钉
Hexagon socket set screws with dog point
45 GB/T 80-1985 内六角凹端紧定螺钉
Hexagon socket set screws with cup point
46 GB/T 83-1988 方头长圆柱球面端紧定螺钉
Square set screws with long dog point and rounded end
47 GB/T 84-1988 方头凹端紧定螺钉
Square set screws with cup point
48 GB/T 85-1988 方头长圆柱端紧定螺钉
Square set screws with long dog point
49 GB/T 86-1988 方头短圆柱锥端紧定螺钉
Square set screws with short dog point and cone end
50 GB/T 89-1976 螺钉 技术条件
Screws--Technical requirements
51 GB/T 90-1985 紧固件验收检查、标志与包装
eptance inspection,marking and packaging of fasteners
52 GB/T 91-1986 开口销
Split pins
53 GB/T 93-1987 标准型弹簧垫圈
Single coil spring lock washers--Normal type
54 GB/T 94.1-1987 弹性垫圈技术条件 弹簧垫圈
Specifications for spring washers--Single coil spring lock washers
55 GB/T 94.2-1987 弹性垫圈技术条件 齿形、锯齿锁紧垫圈
Specifications for spring washers--Toothed lock and serrated lock washers
56 GB/T 94.3-1987 弹性垫圈技术条件 鞍形、波形弹性垫圈
Specifications for spring washers--Curved and wave spring washers
57 GB/T 95-1985 平垫圈-C级
Plain washers--Product grade C
58 GB/T 272-1993 滚动轴承 代号方法
Rolling bearing--Identification code
59 GB/T 273.1-1987 滚动轴承 圆锥滚子轴承 外形尺寸方案
Rolling bearings Tapered roller bearings--Boundary dimensions
60 GB/T 273.3-1988 滚动轴承 向心轴承 外形尺寸方案
Rolling bearings Radial bearings-Boundary dimensions
61 GB/T 274-1991 滚动轴承 装配倒角极限
Rolling bearing chamfer dimension limits
62 GB/T 275-1993 滚动轴承与轴和外壳的配合
Shaft and hing fits for rolling bearings
63 GB/T 276-1994 滚动轴承 深沟球轴承 外形尺寸
Rolling bearings--Deep groove ball bearings--Boundary dimensions
64 GB/T 280-1964 带毡封圈的单列向心球轴承 结构型式和基本尺寸
Rolling bearings--Single-row radial ball bearings withfelt seals--Types and basic dimensions
65 GB/T 281-1994 滚动轴承 调心球轴承 外形尺寸
Rolling bearings--Self-aligning ball bearings--Boundary dimensions
66 GB/T 283-1994 滚动轴承 圆柱滚子轴承 外形尺寸
Rolling bearings--Cylindrical roller bearings-Boundary dimensions
67 GB/T 285-1994 滚动轴承 双列圆柱滚子轴承 外形尺寸
Rolling bearings--Double row cylindrical roller bearings-Boundary dimensions
68 GB/T 286-1964 双列向心球面滚子轴承 结构型式和基本尺寸
Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions
69 GB/T 288-1994 滚动轴承 调心滚子轴承 外形尺寸
Rolling bearings--Self-aligning roller bearings-Boundary dimensions
70 GB/T 289-1964 滚针轴承 结构型式和基本尺寸
Needle roller bearings--Types and basic dimensions
71 GB/T 291-1964 螺旋滚子轴承 结构型式和基本尺寸
Rolling bearings with helically wound cylindrical rollers--Types and basic dimensions
72 GB/T 292-1994 滚动轴承 角接触球轴承 外形尺寸
Rolling bearings--Angular contact ball bearings--Boundary dimensions
73 GB/T 294-1994 滚动轴承 三点和四点接触球轴承 外形尺寸
Rolling bearings--Three point and four point contact ball bearings--Boundary dimensions
74 GB/T 296-1994 滚动轴承 双列角接触球轴承 外形尺寸
Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
75 GB/T 297-1994 滚动轴承 圆锥滚子轴承 外形尺寸
Rolling bearings--Tapered roller bearings--Boundary dimensions
76 GB/T 299-1995 滚动轴承 双列圆锥滚子轴承 外形尺寸
Rolling bearings--Metric double row tapered roller bearin
转载请注明:转载自塑胶五金网技术频道 http://www.sjwj.com/Liter/
本文链接:http://www.sjwj.com/Liter/LiterDetail_8454.html
版权声明:1.塑胶五金网转载作品均注明出处,本网未注明出处和转载的,是出于传递更多信息之目的,并不意味着赞同其观点或证实其内容的真实性,您同意将自行加以判断并承担所有风险。 2.如转载作品侵犯作者署名权,或有其他诸如版权、肖像权、知识产权等方面的伤害,并非本网故意为之,在接到相关权利人通知后将立即加以更正。联系电话:15014822798
投稿声明:可将稿件直接发至邮箱:234145668@qq.com(主题注明“投稿”),也可直接联系 在线客服
联系我们

电话:0769-22305675

传真:0769-23031246

联系我们

联系QQ:234145668

150-1482-2798

周一至周日8:30-18:00

东莞市邦邻信息科技有限公司 版权所有©2006-2024 电话:0769-22305675 传真:0769-23031246
联系QQ:234145668 客服及建议:15014822798 经营证照

服务热线

150-1482-2798

找回账号密码

信息发布咨询

申诉意见反馈

会员功能说明

微信服务号