进口气动法兰球阀开关型调节型气动球阀

更新日期：2024年06月13日
有效期：360天
浏览次数：

价格：￥
供货总量：1000
规格：
所属行业：五金工业品-> 通用配件-> 阀门
关键字：气动法兰球阀开关型气动球阀调节型气动球阀
【想采购，免费发布采购需求】

林人杰

点击询盘

手机查看

商家资料

裕原流体控制（上海）有限公司

联系人：林人杰
部门：销售部
职位：经理
电话：

手机：

地址：中国上海上海金山工业区亭卫公路6495弄168号5幢

进入商铺

在线留言

主营：

蒸汽阀门暖通阀门气动阀

企业其他产品更多>>

产品详情
联系方式

品牌：RETZ/我们一直致力于流体控制和测控领域的持续创新，始于2005……

浮动式，固定式气动法兰球阀用于输送粘性、易结渣介质管道上的球阀应使用全通径的，方便定期的刮蜡吹扫器通过，驱动方式为气动双作用，气动单作用、带手动气动作用，气动调节型，防爆气动球阀 Floating and fixedpneumatic flange ball valves areed for conveying visc and easily slaggingmedia. Ball valves on pipelines should be full bore, convenient for regular waxscraping and blowing through. The driving method is pneumatic double acting,pneumatic single acting, with manual pneumatic action, pneumatic adtmenttype, explosion-proof pneumatic ball valve

进口气动法兰球阀产品详情 Product details

气动法兰球阀的阀座多选用聚四氟乙烯、对位聚苯等高分子聚合材料，密封性能好，但材料相对较软。由于进口气动法兰球阀2.jpg材料较软，但又要达到一定的密封比压，势必增加启闭扭矩，为了尽量改善此种情况，RETZ采用双斜面弹性密封圈或V形槽弹性密封圈结构设计，利用管道内压力推动球体，帮助密封。当介质压力较小时，密封圈与球体接触面积较小，故有较大的密封比压，确保可靠密封。介质压力较大时，密封圈与球体接触面积增大。故密封圈能承受较大的介质推力而不会损坏。对于工作压力很低的球阀，考虑到介质压力不能确保阀座可靠密封，而预紧力长期使用后又会衰减，故对于低压、超低压或真空工况用球阀，采用弹簧加载的阀座密封结构，能确保球阀长期可靠的密封 retz品牌(Floating type, fixed type) The valve seat of pneumatic flange ball valve ismostly made of polymer materials such as polytetrafluoroethylene, counterpointpolystyrene, which has good sealing performance, but the material is relativelysoft. Since the material is relatively soft, but also needs to reach a certainsealing specific pressure, it is bound to increase the opening and closing torque.In order to try to improve this situation, RETZ adopts the structural design ofdouble bevel elastic seal ring or V-groove elastic seal ring, andes thepressure in the pipeline to h the ball to help seal. When the mediumpressure is small, the contact area been the seal ring and the ball issmall, so there is a large sealing specific pressure to ensure reliablesealing. When the medium pressure is large, the contact area been the sealring and the ball increases. Therefore, the seal ring can withstand largemedium tht without damage. For the ball valve with very low workingpressure, considering that the medium pressure cannot ensure the reliablesealing of the valve seat, and the preload will decay after long-terme, thespring loaded valve seat sealing structure is adopted for the ball valve withlow pressure, ultra-low pressure or vacuum conditions to ensure the long-termreliable sealing of the ball valve

进口气动法兰球阀特点Characteristic

1、采用全通径或缩径设计，流通阻力小 Full bore or reduced bore design, low flowresistance

2、采用高平台结构，ISO5211连接标准，能使安装电/气动执行器更为专业化High platform structure and ISO5211 进口进口气动法兰球阀3.jpgconnectionstandard are adopted to make the installation of electric/pneumatic actuatorsmore professional

3、阀杆采用内装式，轴肩及聚四氟乙烯（或增强石墨）推力垫结构防止阀杆因管道内压力而吹出，同时聚四氟乙烯（或增强石墨）材料减小阀门的启闭扭矩，使操作更为省力 The valve rod is ofbuilt-in type. The shaft shoulder and PTFE (or reinforced graphite) tht padstructure prevent the valve rod from blowing out due to the pressure in thepipeline. At the same time, the PTFE (or reinforced graphite) material reducesthe opening and closing torque of the valve, so that the operation is morelabor-saving

4、具有防火防静电结构，在阀杆与阀体及阀杆与球体之间设置导电弹簧，避免因静电打火点燃易燃介质。确保系统安全 It has a fireproofand anti-static structure. A conductive spring is set been the valve rod andthe valve body and been the valve rod and the ball to avoid ignition offlammable media due to static electricity. Ensure system security

5、耐火结构双重保护，当万一发生火灾而使密封圈烧损时，球阀的各个密封部位均能形成金属对金属的硬密封结构 The fire-resistantstructure has double protection. In case of burning of the sealing ring in caseof fire, each sealing part of the ball valve can form a metal to metal hardsealing structure

进口气动法兰球阀性能描述 Performance description

公称通径DN(mm)	浮动式1/2”～8”、固定式2”～20”
公称压力(MPa)	PN1.6、2.5、4.0、6.4 MPa；ANSI 150、300LB
允许压差(MPa)	≤公称压力
阀体形式	两段式铸造球阀
连接形式	法兰式
阀芯形式	"O"型球形阀芯,浮动式，固定式结构
密封填料	V型聚四氟乙烯填料、柔性石墨填料等
流量特性	近似快开型
动作范围	0～90°
泄露量Q	小于额定KV0.01%
可调范围	250：1	350：1
控制方式	开关型(开关两位控制)、调节型(4～20mA控制)

执行器参数Actuator parameters

执行器型号	AT、AR、AW系列单、双作用气动执行器
供气压力	0.4～0.7MPa
气源接口	G1/4"、G1/8"、G3/8"、G1/2"
环境温度	-30～+70℃
作用形式	单作用执行机构：气关式(B)--失气时阀位开(FO)；气开式(K)--失气时阀位关(FC) 双作用执行机构：气关式(B)--失气时阀位保持(FL)；气开式(K)-- 失气时阀位保持(FL)
可配附件	定位器、电磁阀、空气过滤减压器、保位阀、行程开关、阀位传送器、手轮机构等